Lenovo Z2 Plus (Z2132) Pattern Lock Remove Done By Full Flash

   Lenovo Z2 Plus (Z2132) Pattern Lock Remove By Full Flash

If Your Mobile Lenovo Z2 Plus (Z2132) (Marshmallow) Locked With Pattern Or Stuck At Startup Logo. And If You Want To Remove Pattern Lock Via Hard Reset But There Is No Option To Reset Your Mobile With Hard Reset. But You Can Remove Your Pattern Lock With Full Flash Your Mobile. This Flashing Guide Will Help You To Flash Your Mobile.
Follow These Steps:-

1. At First, You Have To Download The Firmware Of Lenovo Z2 Plus (Z2132) From Here:- Click Here
And For Flash Tool:- Click Here

2. After Download Firmware Extract It. And Install QFIL Flash Tool.

3. For Flash Your Device Your Device Must Be In Download Mode. For Entering In download Mode Connect Your Device In Power Off State By Pressing & Hold Both Vol+ & Vol- Keys And Insert USB Cable. Your Device Show FastBoot Mode. Now Open FastBoot Command Terminal & Enter Command.
For Check Device :- (fastboot -i 0x2b4c devices) Then Press Enter.
For Entering In Download Mode (EDL Mode) :- (fastboot -i 0x2b4c oem reboot-edl) Then Press Enter. 
Now Windows Will Detect Your Mobile As (qualcomm hs-usb qdloader 9008).

4. Now Open OFIL Flashing Tool. At First Select Build Type Tick On Flat Build And Select Files. In Select Programmer Tab Select (prog_emmc_firehose_8996_ddr.elf). And In Load Content Tab Select File (rawprogram0.xml Then patch0.xml). After That Click On Download.
Flashing Process Will Start & It Will Take 5 To 10 Min.

5. After Complete Flashing Process Disconnect Your Mobile. And Power On It Manually By Pressing & Hold Power Key For 1 To 2 Min.

6. Now Your Mobile Lenovo Z2 Plus (Z2132) Is Ready For Use.

7. If You Want To Watch Video Tutorial:- Click Here 

Share For Helping Others!

Leave a Reply

Your email address will not be published. Required fields are marked *