LYF LS-5014 Full Flashing Guide | LYF LS-5014 Hang On Logo Solved

      No Comments on LYF LS-5014 Full Flashing Guide | LYF LS-5014 Hang On Logo Solved

LYF LS-5014 COMPLETE FLASHING GUIDE

If Your Phone Stuck At Startup Logo. And Not Boot Up Normally. So Don’t Worry About It. We Have Solution For That. Follow These Steps To Re-Install Your Mobile Software Easiest Way.
1. At First Download Firmware On Your Computer. Download Link:- Click Here
And Download QFIL Tool:- Click Here
2. After Download Firmware Extract It. Connect Your Mobile In Download Mode By Pressing Vol+ And Vol- Key And Insert USB Cable. Windows Will Detect Your Device. After That Install Qualcomm Driver. Your Device Make Port As (Qualcomm USB qdloader 9008).
3. After That Open QFIL Tool….
4. Now Tick On Select Build Type Tick On (Flat Build).

 

5. Now Select Programmer File Click On Browse And Select (prog_emmc_firehose_8909_ddr.mbn)

6. Now Select Build Click On Load XML… And Select (rawprogram0.xml Then patch0.xml).
7. After Select, Both Files Click On Download Option. Flashing Process Will Be Started And It Will Takes 5 To 10 Min To Complete The Flash Process.
8. After That Power On Your Mobile Manually. 
9. For Power On Your Mobile Continue Hold Power Key, 2 To 5 Min-Till Mobile Phone Powered On.
10. Now Your Mobile Is Now Ready For Use.

 

You Can Also Watch Video Tutorial. If You Want To Watch Video Tutorial:- Click Here

Share For Helping Others!

Leave a Reply

Your email address will not be published. Required fields are marked *