Vivo Y31L Full Flashing Guide | Vivo Y31L Install Stock ROM

  Vivo Y31L Pattern Lock Remove Done Full Flashing Guide

If Your Vivo Y31L Stuck At Startup Logo. Or Your Phone Is Not Hard Reseted By Recovery Mode. Then You Can Fix Your Mobile By Full Flash. You Can Easily Flash Your Mobile By Following This Flashing Guide.
Follow These Steps:-
1. At First, You Have To Download The Flash File And Download Tool.
Firmware Download Link:- Click Here
Second Firmware Link:- Click Here
Download Tool Link:- Click Here

2. After Download Firmware & Download Tool Extract Firmware And Install Download Tool (QFIL Tool).


3. Connect Your Mobile In Download Mode By Pressing Vol+ And Vol- Key And Insert USB Cable. Windows Will Detect Mobile. After That Install Qualcomm Driver. 

4. After That Open QFIL Tool…

5. Now Tick On Select Build Type (Flat Build).

6. Now Select Programmer File Click On Browse 
And Select (prog_emmc_firehose_8916.mbn)

7. Now Select Build Click On Load XML… And Select (rawprogram_unsparse.xml And Select patch0.xml). See the image below.

8. After Select, Both Files Click On Download Option. It Will Takes 5 To 10 Min To Complete The Flash Process.

9. After That Power On Your Mobile Manually. 

10. For Power On Your Mobile Continue Hold Power Key, 2 To 5 Min-Till Mobile Phone Powered On.

 


11. Now Your Mobile Is Now Ready For Use.


12. You Can Also Watch Video Tutorial Of Vivo Y31L Full Flashing Tutorial:- Click Here

Share For Helping Others!

Leave a Reply

Your email address will not be published. Required fields are marked *